Support Stand Installation Instructions
Anchor bolts are HILTI HKD drop in type anchors. Find center line of pipe and mark with chalk. Measure half the distance of the clamp, and at that point run a chalk line on the concrete at that point. Insert HDK anchors in ¾" drilled holes and hit bottom with hammer. Make sure top of HKD anchor is flush with the concrete.
Stamford Scientific International Incorporated,
4 Tucker Dr, Poughkeepsie, N.Y. 12603 U.S.A.
Tel: (845) 454-8171 Fax: (845) 454-8094
Email: info@stamfordscientific.com
